Endre søk
Link to record
Permanent link

Direct link
BETA
Magnevall, Martin
Publikasjoner (10 av 13) Visa alla publikasjoner
Devotta, A. M., Sivaprasad, P. V., Beno, T., Eynian, M., Hjertig, K., Magnevall, M. & Lundblad, M. (2019). A modified johnson-cook model for ferritic-pearlitic steel in dynamic strain aging regime. Metals, 9(5), Article ID 528.
Åpne denne publikasjonen i ny fane eller vindu >>A modified johnson-cook model for ferritic-pearlitic steel in dynamic strain aging regime
Vise andre…
2019 (engelsk)Inngår i: Metals, ISSN 2075-4701, Vol. 9, nr 5, artikkel-id 528Artikkel i tidsskrift (Fagfellevurdert) Published
Abstract [en]

In this study, the flow stress behavior of ferritic-pearlitic steel (C45E steel) is investigated through isothermal compression testing at different strain rates (1 s-1, 5 s-1, and 60 s-1) and temperatures ranging from 200 to 700 °C. The stress-strain curves obtained from experimental testing were post-processed to obtain true stress-true plastic strain curves. To fit the experimental data to well-known material models, Johnson-Cook (J-C) model was investigated and found to have a poor fit. Analysis of the flow stress as a function of temperature and strain rate showed that among other deformation mechanisms dynamic strain aging mechanism was active between the temperature range 200 and 400 °C for varying strain rates and J-C model is unable to capture this phenomenon. This lead to the need to modify the J-C model for the material under investigation. Therefore, the original J-C model parameters A, B and n are modified using the polynomial equation to capture its dependence on temperature and strain rate. The results show the ability of the modified J-C model to describe the flow behavior satisfactorily while dynamic strain aging was operative. © 2019 by the authors. Licensee MDPI, Basel, Switzerland.

sted, utgiver, år, opplag, sider
MDPI AG, 2019
Emneord
Dynamic strain aging, Flow stress, Modified johnson-cook model
HSV kategori
Identifikatorer
urn:nbn:se:bth-18160 (URN)10.3390/met9050528 (DOI)000478818700046 ()2-s2.0-85066741813 (Scopus ID)
Merknad

open access

Tilgjengelig fra: 2019-06-20 Laget: 2019-06-20 Sist oppdatert: 2019-09-10bibliografisk kontrollert
Östling, D. & Magnevall, M. (2019). Modelling the dynamics of a large damped boring bar in a lathe.. In: Procedia CIRP: . Paper presented at 17th CIRP Conference on Modelling of Machining Operations, CIRP CMMO, Sheffield, 13 June 2019 through 14 June 2019 (pp. 285-289). Elsevier B.V., 82
Åpne denne publikasjonen i ny fane eller vindu >>Modelling the dynamics of a large damped boring bar in a lathe.
2019 (engelsk)Inngår i: Procedia CIRP, Elsevier B.V. , 2019, Vol. 82, s. 285-289Konferansepaper, Publicerat paper (Fagfellevurdert)
Abstract [en]

Boring bars with tuned mass dampers have a passive damper tuned with respect to the frequency of the first bending mode of the tool. When the tool is clamped into the machine tool there is a stiffness loss that lowers the natural frequency of the bar compared to ideal clamping conditions. For large tools the difference can be more than 35%, depending on clamping structure, tool size and overhang. In this paper we investigate a simple two-degree-of-freedom model for the tool-machine interaction consisting of a bending mode coupled with a rotational stiff mode. The model gives good insight into the system behavior and fits well with measurements. © 2019 The Authors. Published by Elsevier B.V. Peer-review under responsibility of the scientific committee of The 17th CIRP Conference on Modelling of Machining Operations

sted, utgiver, år, opplag, sider
Elsevier B.V., 2019
Serie
Procedia CIRP ; 82
Emneord
Internal turning, Tool clamping, Tuned mass damper, Acoustic devices, Degrees of freedom (mechanics), Vibration control, Bending modes, Clamping conditions, Passive dampers, Stiffness loss, System behaviors, Tool machines, Tuned mass dampers, Two-degree-of-freedom models, Machining centers
HSV kategori
Identifikatorer
urn:nbn:se:bth-18636 (URN)10.1016/j.procir.2019.04.041 (DOI)2-s2.0-85070437675 (Scopus ID)
Konferanse
17th CIRP Conference on Modelling of Machining Operations, CIRP CMMO, Sheffield, 13 June 2019 through 14 June 2019
Tilgjengelig fra: 2019-09-10 Laget: 2019-09-10 Sist oppdatert: 2019-09-10bibliografisk kontrollert
Magnevall, M., Lundblad, M., Ahlin, K. & Broman, G. (2012). High Frequency Measurements of Cutting Forces in Milling by Inverse Filtering. Machining science and technology, 16(4), 487-500
Åpne denne publikasjonen i ny fane eller vindu >>High Frequency Measurements of Cutting Forces in Milling by Inverse Filtering
2012 (engelsk)Inngår i: Machining science and technology, ISSN 1091-0344, E-ISSN 1532-2483, Vol. 16, nr 4, s. 487-500Artikkel i tidsskrift (Fagfellevurdert) Published
Abstract [en]

Accurate estimates of cutting forces are important in the evaluation of different cutting tool geometries and concepts. However, dynamic influences from the measurement system affect the result, which can make the obtained cutting force data erroneous and misleading. This article presents a method to obtain an inverse filter which compensates for the dynamic influences of the measurement system. Using this approach, unwanted dynamic effects of the measurement system can be counteracted, making it possible to retain information related to the cutting forces contained in the high frequency region. The advantage of the proposed method is illustrated by comparing simulated, inverse- and low-pass filtered forces to unfiltered forces under different cutting conditions. The results show that inverse filtering increases the usable frequency range of the force dynamometer and thereby provide more reliable results compared to both low-pass and unfiltered forces.

sted, utgiver, år, opplag, sider
Taylor & Francis, 2012
Emneord
cutting force, deconvolution, dynamometer, inverse filter
HSV kategori
Identifikatorer
urn:nbn:se:bth-6947 (URN)10.1080/10910344.2012.698970 (DOI)000311938600001 ()oai:bth.se:forskinfo51C0FB8631E9DA26C1257B9B0027DFD7 (Lokal ID)oai:bth.se:forskinfo51C0FB8631E9DA26C1257B9B0027DFD7 (Arkivnummer)oai:bth.se:forskinfo51C0FB8631E9DA26C1257B9B0027DFD7 (OAI)
Tilgjengelig fra: 2013-07-01 Laget: 2013-07-01 Sist oppdatert: 2017-12-04bibliografisk kontrollert
Magnevall, M., Josefsson, A., Ahlin, K. & Broman, G. (2012). Nonlinear structural identification by the "reverse Path" spectral method. Journal of Sound and Vibration, 331(4), 938-946
Åpne denne publikasjonen i ny fane eller vindu >>Nonlinear structural identification by the "reverse Path" spectral method
2012 (engelsk)Inngår i: Journal of Sound and Vibration, ISSN 0022-460X, E-ISSN 1095-8568, Vol. 331, nr 4, s. 938-946Artikkel i tidsskrift (Fagfellevurdert) Published
Abstract [en]

When dealing with nonlinear dynamical systems, it is important to have efficient, accurate and reliable tools for estimating both the linear and nonlinear system parameters from measured data. An approach for nonlinear system identification widely studied in recent years is "Reverse Path". This method is based on broad-band excitation and treats the nonlinear terms as feedback forces acting on an underlying linear system. Parameter estimation is performed in the frequency domain using conventional multiple-input-multiple- output or multiple-input-single-output techniques. This paper presents a generalized approach to apply the method of "Reverse Path" on continuous mechanical systems with multiple nonlinearities. The method requires few spectral calculations and is therefore suitable for use in iterative processes to locate and estimate structural nonlinearities. The proposed method is demonstrated in both simulations and experiments on continuous nonlinear mechanical structures. The results show that the method is effective on both simulated as well as experimental data.

sted, utgiver, år, opplag, sider
Elsevier, 2012
Emneord
Dynamical systems Estimation, Frequency estimation
HSV kategori
Identifikatorer
urn:nbn:se:bth-7187 (URN)10.1016/j.jsv.2011.10.029 (DOI)000302038500014 ()oai:bth.se:forskinfo3DDC56A0A0ABB8B3C125797400494C03 (Lokal ID)oai:bth.se:forskinfo3DDC56A0A0ABB8B3C125797400494C03 (Arkivnummer)oai:bth.se:forskinfo3DDC56A0A0ABB8B3C125797400494C03 (OAI)
Eksternt samarbeid:
Tilgjengelig fra: 2012-11-27 Laget: 2011-12-28 Sist oppdatert: 2017-12-04bibliografisk kontrollert
Josefsson, A., Magnevall, M., Ahlin, K. & Broman, G. (2012). Spatial location identification of structural nonlinearities from random data. Mechanical systems and signal processing, 27(1), 410-418
Åpne denne publikasjonen i ny fane eller vindu >>Spatial location identification of structural nonlinearities from random data
2012 (engelsk)Inngår i: Mechanical systems and signal processing, ISSN 0888-3270, E-ISSN 1096-1216, Vol. 27, nr 1, s. 410-418Artikkel i tidsskrift (Fagfellevurdert) Published
Abstract [en]

With growing demands on product performance and growing complexity of engineering structures, efficient tools for analyzing their dynamic behavior are essential. Linear techniques are well developed and often utilized. However, sometimes the errors due to linearization are too large to be acceptable, making it necessary to take nonlinear effects into account. In many practical applications it is common and reasonable to assume that the nonlinearities are highly local and thus only affect a limited set of spatial coordinates. The purpose of this paper is to present an approach to finding the spatial location of nonlinearities from measurement data, as this may not always be known beforehand. This information can be used to separate the underlying linear system from the nonlinear parts and create mathematical models for efficient parameter estimation and simulation. The presented approach builds on the reverse-path methodology and utilizes the coherence functions to determine the location of nonlinear elements. A systematic search with Multiple Input/Single Output models is conducted in order to find the nonlinear functions that best describe the nonlinear restoring forces. The obtained results indicate that the presented approach works well for identifying the location of local nonlinearities in structures. It is verified by simulation data from a cantilever beam model with two local nonlinearities and experimental data from a T-beam experimental set-up with a single local nonlinearity. A possible drawback is that a relatively large amount of data is needed. Advantages of the approach are that it only needs a single excitation point that response data at varying force amplitudes is not needed and that no prior information about the underlying linear system is needed.

sted, utgiver, år, opplag, sider
Elsevier, 2012
Emneord
Location identification, Reverse-path, Structural nonlinearities, System identification
HSV kategori
Identifikatorer
urn:nbn:se:bth-7174 (URN)10.1016/j.ymssp.2011.07.020 (DOI)000298865300007 ()oai:bth.se:forskinfo00E2D22196964957C125797900367D30 (Lokal ID)oai:bth.se:forskinfo00E2D22196964957C125797900367D30 (Arkivnummer)oai:bth.se:forskinfo00E2D22196964957C125797900367D30 (OAI)
Eksternt samarbeid:
Tilgjengelig fra: 2012-11-27 Laget: 2012-01-02 Sist oppdatert: 2017-12-04bibliografisk kontrollert
Magnevall, M. (2011). Simulation and Experimental Methods for Characterization of Nonlinear Mechanical Systems. (Doctoral dissertation). Karlskrona: Blekinge Institute of Technology
Åpne denne publikasjonen i ny fane eller vindu >>Simulation and Experimental Methods for Characterization of Nonlinear Mechanical Systems
2011 (engelsk)Doktoravhandling, med artikler (Annet vitenskapelig)
Abstract [en]

Trial and error and the use of highly time-consuming methods are often necessary for investigation and characterization of nonlinear systems. However, for the rather common case where a nonlinear system has linear relations between many of its degrees of freedom there are opportunities for more efficient approaches. The aim of this thesis is to develop and validate new efficient simulation and experimental methods for characterization of mechanical systems with localized nonlinearities. The purpose is to contribute to the development of analysis tools for such systems that are useful in early phases of the product innovation process for predicting product properties and functionality. Fundamental research is combined with industrial case studies related to metal cutting. Theoretical modeling, computer simulations and experimental testing are utilized in a coordinated approach to iteratively evaluate and improve the methods. The nonlinearities are modeled as external forces acting on the underlying linear system. In this way, much of the linear theories behind forced response simulations can be utilized. The linear parts of the system are described using digital filters and modal superposition, and the response of the system is recursively solved for together with the artificial external forces. The result is an efficient simulation method, which in conjunction with experimental tests, is used to validate the proposed characterization methods. A major part of the thesis addresses a frequency domain characterization method based on broad-band excitation. This method uses the measured responses to create artificial nonlinear inputs to the parameter estimation model. Conventional multiple-input/multiple-output techniques are then used to separate the linear system from the nonlinear parameters. A specific result is a generalization of this frequency domain method, which allows for characterization of continuous systems with an arbitrary number of localized zero-memory nonlinearities in a structured way. The efficiency and robustness of this method is demonstrated by both simulations and experimental tests. A time domain simulation and characterization method intended for use on systems with hysteresis damping is also developed and its efficiency is demonstrated by the case of a dry-friction damper. Furthermore, a method for improved harmonic excitation of nonlinear systems using numerically optimized input signals is developed. Inverse filtering is utilized to remove unwanted dynamic effects in cutting force measurements, which increases the frequency range of the force dynamometer and significantly improves the experimental results compared to traditional methods. The new methods form a basis for efficient analysis and increased understanding of mechanical systems with localized nonlinearities, which in turn provides possibilities for more efficient product development as well as for continued research on analysis methods for nonlinear mechanical structures.

sted, utgiver, år, opplag, sider
Karlskrona: Blekinge Institute of Technology, 2011
Serie
Blekinge Institute of Technology Doctoral Dissertation Series, ISSN 1653-2090 ; 14
Emneord
nonlinear structural dynamics, simulation, system characterization, experimental techniques, experimental methods
HSV kategori
Identifikatorer
urn:nbn:se:bth-00513 (URN)oai:bth.se:forskinfo6B82AD122DA4F2AEC1257937002D07D0 (Lokal ID)978-91-7295-218-8 (ISBN)oai:bth.se:forskinfo6B82AD122DA4F2AEC1257937002D07D0 (Arkivnummer)oai:bth.se:forskinfo6B82AD122DA4F2AEC1257937002D07D0 (OAI)
Tilgjengelig fra: 2012-09-18 Laget: 2011-10-28 Sist oppdatert: 2015-06-30bibliografisk kontrollert
Magnevall, M. (2008). Methods for Simulation and Characterization of Nonlinear Mechanical Structures. (Licentiate dissertation). Karlskrona: Blekinge Institute of Technology
Åpne denne publikasjonen i ny fane eller vindu >>Methods for Simulation and Characterization of Nonlinear Mechanical Structures
2008 (engelsk)Licentiatavhandling, med artikler (Annet vitenskapelig)
Abstract [en]

Trial and error and the use of highly time-consuming methods are often necessary for modeling, simulating and characterizing nonlinear dynamical systems. However, for the rather common special case when a nonlinear system has linear relations between many of its degrees of freedom there are particularly interesting opportunities for more efficient approaches. The aim of this thesis is to develop and validate new efficient methods for the theoretical and experimental study of mechanical systems that include significant zero-memory or hysteretic nonlinearities related to only small parts of the whole system. The basic idea is to take advantage of the fact that most of the system is linear and to use much of the linear theories behind forced response simulations. This is made possible by modeling the nonlinearities as external forces acting on the underlying linear system. The result is very fast simulation routines where the model is based on the residues and poles of the underlying linear system. These residues and poles can be obtained analytically, from finite element models or from experimental measurements, making these forced response routines very versatile. Using this approach, a complete nonlinear model contains both linear and nonlinear parts. Thus, it is also important to have robust and accurate methods for estimating both the linear and nonlinear system parameters from experimental data. The results of this work include robust and user-friendly routines based on sinusoidal and random noise excitation signals for characterization and description of nonlinearities from experimental measurements. These routines are used to create models of the studied systems. When combined with efficient simulation routines, complete tools are created which are both versatile and computationally inexpensive. The developed methods have been tested both by simulations and with experimental test rigs with promising results. This indicates that they are useful in practice and can provide a basis for future research and development of methods capable of handling more complex nonlinear systems.

sted, utgiver, år, opplag, sider
Karlskrona: Blekinge Institute of Technology, 2008. s. 97
Serie
Blekinge Institute of Technology Licentiate Dissertation Series, ISSN 1650-2140 ; 13
Emneord
nonlinear dynamics, nonlinear parameter estimation, harmonic balance, reverse-path, zero-memory nonlinear systems, hysteretic nonlinearities, dry-friction, geometric nonlinearities
HSV kategori
Identifikatorer
urn:nbn:se:bth-00430 (URN)oai:bth.se:forskinfo89E87A154FCB4936C125757B00343A76 (Lokal ID)978-91-7295-156-3 (ISBN)oai:bth.se:forskinfo89E87A154FCB4936C125757B00343A76 (Arkivnummer)oai:bth.se:forskinfo89E87A154FCB4936C125757B00343A76 (OAI)
Tilgjengelig fra: 2012-09-18 Laget: 2009-03-16 Sist oppdatert: 2015-06-30bibliografisk kontrollert
Josefsson, A., Magnevall, M. & Ahlin, K. (2007). On Nonlinear Parameter Estimation with Random Noise Signals. Paper presented at IMAC XXV. Paper presented at IMAC XXV. Orlando, Florida: Society for Experimental Mechanics
Åpne denne publikasjonen i ny fane eller vindu >>On Nonlinear Parameter Estimation with Random Noise Signals
2007 (engelsk)Konferansepaper, Publicerat paper (Fagfellevurdert) Published
Abstract [en]

In the field of nonlinear dynamics it is essential to have well tested and reliable tools for estimating the nonlinear parameters from measurement data. This paper presents an identification technique based on using random noise signals, as initially developed by Julius S. Bendat. With this method the nonlinearity is treated as a feedback forcing term acting on an underlying linear system. The parameter estimation is then performed in the frequency domain by using conventional MISO/MIMO techniques. To apply this method successfully it is necessary to have some pre-information about the model structure and thus methods for nonlinear characterization and localization are studied. The paper also demonstrates the various ways the method can be formulated for multiple-degree-of-freedoms. The implementation of the method is illustrated with simulated data as well as a practical application, where the method is used to create a dynamic model of a test-rig with a significant nonlinearity.

sted, utgiver, år, opplag, sider
Orlando, Florida: Society for Experimental Mechanics, 2007
Emneord
nonlinear, characterization, localization, parameter estimation, reverse-path, geometric nonlinearity
HSV kategori
Identifikatorer
urn:nbn:se:bth-9042 (URN)oai:bth.se:forskinfo38E598522AC23766C1257336004CD245 (Lokal ID)0-912053-96-8 (ISBN)oai:bth.se:forskinfo38E598522AC23766C1257336004CD245 (Arkivnummer)oai:bth.se:forskinfo38E598522AC23766C1257336004CD245 (OAI)
Konferanse
IMAC XXV
Tilgjengelig fra: 2012-09-18 Laget: 2007-08-13 Sist oppdatert: 2015-06-30bibliografisk kontrollert
Magnevall, M., Josefsson, A. & Ahlin, K. (2007). Parameter Estimation of Hysteresis Elements Using Harmonic Input. Paper presented at IMAC XXV. Paper presented at IMAC XXV. Orlando, Florida
Åpne denne publikasjonen i ny fane eller vindu >>Parameter Estimation of Hysteresis Elements Using Harmonic Input
2007 (engelsk)Konferansepaper, Publicerat paper (Fagfellevurdert) Published
Abstract [en]

The industrial demand on good dynamical simulation models is increasing. Since most structures show some form of nonlinear behavior, linear models are not good enough to predict the true dynamical behavior. Hysteresis is a highly nonlinear phenomenon which occurs in for example dampers and mechanical joints. This paper presents a method for parameter estimation on nonlinear systems under harmonic excitation. By using the principle of harmonic balance or multi harmonic balance a theoretical frequency response function of the studied system can be estimated. This frequency response function can, in conjunction with measured nonlinear transfer functions, be used to make parameter estimations of the nonlinearity present in the system. A major benefit using this method is the ability to use arbitrary nonlinear functions. This means that the method can be applied to nonlinear systems with memory, for instance systems with hysteresis effects. The method is applied to both simulated systems and an experimental test rig.

sted, utgiver, år, opplag, sider
Orlando, Florida: , 2007
Emneord
nonlinear, characterization, parameter estimation, harmonic balance, sine excitation
HSV kategori
Identifikatorer
urn:nbn:se:bth-9039 (URN)oai:bth.se:forskinfo0D759FB0FF9EFD0BC1257336004F3A5F (Lokal ID)0-912053-96-8 (ISBN)oai:bth.se:forskinfo0D759FB0FF9EFD0BC1257336004F3A5F (Arkivnummer)oai:bth.se:forskinfo0D759FB0FF9EFD0BC1257336004F3A5F (OAI)
Konferanse
IMAC XXV
Tilgjengelig fra: 2012-09-18 Laget: 2007-08-13 Sist oppdatert: 2015-06-30bibliografisk kontrollert
Josefsson, A., Magnevall, M. & Ahlin, K. (2006). Control Algorithm For Sine Excitation On Nonlinear Systems. Paper presented at IMAC XXIV. Paper presented at IMAC XXIV. St. Louis, USA: Society for Experimental Mechanics
Åpne denne publikasjonen i ny fane eller vindu >>Control Algorithm For Sine Excitation On Nonlinear Systems
2006 (engelsk)Konferansepaper, Publicerat paper (Annet vitenskapelig) Published
Abstract [en]

When using electrodynamic vibration exciters to excite structures, the actual force applied to the structure under test is the reaction force between the exciter and the structure. The magnitude and phase of the reaction force is dependent upon the characteristics of the structure and exciter. Therefore the quality of the reaction force i.e. the force applied on the structure depends on the relationship between the exciter and structure under test. Looking at the signal from the force transducer when exciting a structure with a sine wave, the signal will appear harmonically distorted within the regions of the resonance frequencies. This phenomenon is easily observed when performing tests on lightly damped structures. The harmonic distortion is a result of nonlinearities produced by the shaker when undergoing large amplitude vibrations, at resonances. When dealing with non-linear structures, it is of great importance to be able to keep a constant force level as well as a non-distorted sine wave in order to get reliable results within the regions of the resonance frequencies. This paper presents theoretical methods that can be used to create a non-distorted sinusoidal excitation signal with constant force level.

sted, utgiver, år, opplag, sider
St. Louis, USA: Society for Experimental Mechanics, 2006
Emneord
control algorithm, sine excitation, shaker, nonlinear, harmonic distortion
HSV kategori
Identifikatorer
urn:nbn:se:bth-9041 (URN)oai:bth.se:forskinfo36C9F606F1F587E7C1257336004E0706 (Lokal ID)oai:bth.se:forskinfo36C9F606F1F587E7C1257336004E0706 (Arkivnummer)oai:bth.se:forskinfo36C9F606F1F587E7C1257336004E0706 (OAI)
Konferanse
IMAC XXIV
Tilgjengelig fra: 2012-09-18 Laget: 2007-08-13 Sist oppdatert: 2015-06-30bibliografisk kontrollert
Organisasjoner