Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Active Vibration Control of Boring Bar Vibrations
Ansvarig organisation
2004 (Engelska)Rapport (Övrigt vetenskapligt)
Abstract [en]

The boring operation is a cumbersome manufacturing process plagued by noise and vibration-related problems. A deep internal boring operation in a workpiece is a classic example of chatter-prone machining. The manufacturing industry today is facing tougher tolerances of product surfaces and a desire to process hard-to-cut materials; vibrations must thus be kept to a minimum. An increase in productivity is also interesting from a manufacturing point of view. Penetrating deep and narrow cavities require that the dimensions of the boring bar are long and slender. As a result, the boring bar is inclined to vibrate due to the limited dynamic stiffness. Vibration affects the surface finish, leads to severe noise in the workshop and may also reduce tool life. This report presents an active control solution based on a standard boring bar with an embedded piezo ceramic actuator; this is placed in the area of the peak modal strain energy of the boring bar bending mode to be controlled. An accelerometer is also included in the design; this is mounted as close as possible to the cutting tool. Embedding the electronic parts not only protects them from the harsh environment in a lathe but also enable the design to be used on a general lathe as long as the mounting arrangements are relatively similar. Three different algorithms have been tested in the control system. Since the excitation source of the original vibrations, i.e. the chip formation process cannot be observed directly, the algorithms must be constructed on the basis of a feedback approach. Experimental results from boring operations show that the vibration level can be reduced by 40 dB at the resonance frequency of a fundamental boring bar bending mode; several of its harmonics can also be reduced significantly.

Ort, förlag, år, upplaga, sidor
2004.
Serie
Blekinge Institute of Technology Research report, ISSN 1103-1581 ; 7
Nyckelord [en]
Active Vibraion Control, Boring Bar Vibrations, Filtered-x LMS
Nationell ämneskategori
Signalbehandling
Identifikatorer
URN: urn:nbn:se:bth-00251Lokalt ID: oai:bth.se:forskinfo8CD58085270D5E42C1256EE4003CC880OAI: oai:DiVA.org:bth-00251DiVA, id: diva2:837747
Tillgänglig från: 2012-09-18 Skapad: 2004-08-02 Senast uppdaterad: 2015-06-30Bibliografiskt granskad

Open Access i DiVA

fulltext(2072 kB)633 nedladdningar
Filinformation
Filnamn FULLTEXT01.pdfFilstorlek 2072 kBChecksumma SHA-512
83c1b9003807c6907b67f72a4870bec356945b1be92d79377ed3b42183ad6028823e8e0f56b502bc07914eef49e02ebf7dda1c9b0375eda9cd07c7bcfa4d5357
Typ fulltextMimetyp application/pdf

Personposter BETA

Håkansson, Lars

Sök vidare i DiVA

Av författaren/redaktören
Håkansson, Lars
Signalbehandling

Sök vidare utanför DiVA

GoogleGoogle Scholar
Totalt: 633 nedladdningar
Antalet nedladdningar är summan av nedladdningar för alla fulltexter. Det kan inkludera t.ex tidigare versioner som nu inte längre är tillgängliga.

urn-nbn

Altmetricpoäng

urn-nbn
Totalt: 914 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf