ABSTRACT This thesis is part of a research project in the company of SP, Sweden to investigate the static and dynamic behaviors of Älvsbacka Timber Bridge that known as ‘a smart bridge’. In this context the investigation of project was carried out with simulations and experiments. The Simulation of the bridge was created by using the software program MULTIFRAME 4D®.The simulation analysis includes Finite Element Method, Modal Analysis, Static & Dynamic Force Analyzes. After all simulation analysis, in order to verify the results of the simulations, some experimental tests were performed at Älvsbacka Timber Bridge. The obtained real data which comes from the experimental tests were implemented by use MATLAB® software program. After all investigations, it was achieved as a conclusion of that the results of simulation and experiments showed a good correspondence.
In this ‘Master Science Thesis’, the project of static and dynamic analysis of Älvsbacka timber bridge was investigated with use simulations models which are created by MultiFrame 4D commercial software program. However the results from the simulations were verified with the results by different methods such as hand calculations, MATLAB commercial software program implementation and smart measurement systems that have been mounted on the bridge for Structural Health Monitoring.