Utveckling av teleskopisk z-axel i ett gantrysystem
2026 (Swedish)Independent thesis Basic level (professional degree), 12 credits / 18 HE credits
Student thesisAlternative title
Design and Development of a Telescopic Z-Axis for a Gantry System (English)
Abstract [en]
This thesis project was carried out in collaboration with Yaskawa Nordic AB and aims to develop a telescopic Z-axis for a gantry system. The objective was to enable long vertical stroke within limited installation height while fulfilling requirements regarding strength, stiffness, dynamic performance, precision, and safety. The structure was dimensioned for a maximum load of 300 kg with a safety factor of at least 4 and a minimum critical natural frequency of 12 Hz. The development followed an iterative engineering process including background research, requirement specification, concept generation, and evaluation using a Pugh matrix. Several drive concepts were investigated, including screw-driven, chain-driven, and belt-driven mechanisms. After evaluation and further refinement, a belt-driven solution was selected as the final concept due to its robustness, reduced maintenance needs, and reliable power transmission. The final design was modeled in Autodesk Inventor and verified using analytical calculations and finite element analysis (FEM) in Inventor Nastran. Structural integrity was assessed using von Mises stress criteria, and modal analysis was performed to ensure compliance with dynamic requirements. The results demonstrate that the developed telescopic Z-axis is technically feasible, fulfills the specified requirements, and is suitable for industrial application.
Place, publisher, year, edition, pages
2026. , p. 78
Keywords [sv]
teleskopmekanism, gantrysystem, Z-axel, remdrift, FEM-analys, modalanalys
National Category
Mechanical Engineering
Identifiers
URN: urn:nbn:se:bth-30567OAI: oai:DiVA.org:bth-30567DiVA, id: diva2:2108004
External cooperation
Yaskawa Nordic AB
Subject / course
MT1475 Thesis
Educational program
MTGHM Bachelor of Science in Engineering: Mechanical Engineering
Presentation
2026-05-28, J1630, Valhallavägen 10, 371 79 Karlskrona, Karlskrona, 08:00 (Swedish)
Supervisors
Examiners
2026-10-132026-10-052026-10-13Bibliographically approved